ARTEC

	ATE, ASE Series Another standard for general acoustic guitars. - Width : 50 mm -	Cutting Templates (installation) Dimension: ATE : W50 x H98 x D40 ASE : W50 x H90 x D40

MODELS	EQ-BAND	NOTCH	PHASE	CHORUS
ATE-N, ASE-N	4
ATE-4, ASE-4	4	Yes
ATE-CH, ASE-CH	3			Yes
ATE-BL, ASE-BL	3		Yes

Preamp includes: - standard jack - screws and wire-clip
Optional: - piezo pickup - package and battery - endpin jack

ATE-N

4 band, Notch eq for upper-bout

ASE-N

4 band Notch eq for lower-bout

It features four band equalizer - Bass, Middle, Treble & Presence - with Notch filter function, Master volume and Low Battery check LED. Using metal case could eliminate the noise and the slim body case could be fit in any size of guitars.

ATE-4

4 band eq for upper-bout

ASE-4

4 band for lower-bout

It features four band equalizer - Bass, Middle, Treble & Presence - with Master volume and Low Battery check LED. Using metal case could eliminate the noise and the slim body case could be fit in any size of guitars.

ATE-N, ASE-N, ATE-4, ASE-4 Common Features

Nominal input level:
Frequency Response:
Input Impedance:
Output Impedance:
Power Supply:
Battery Life:
Bass control range:
Middle control range
Treble control range
Presence control range:
Low Battery:
Current Drain:
Input Jack:
Output Jack:

-20 dBV
20 Hz - 20 kHz
1 MOhm
1 kOhm
9 V Alkaline Battery
over 1800 hours
± 12 dB 80 Hz, 570 mVp-p
± 12 dB 800 Hz, 490 mVp-p
± 12 dB 3 kHz, 500 mVp-p
± Cut 12 dB 15 kHz, 500 mVp-p
Low Battery check at 5 V
Less than 0.3 mA
2.5 mm Mono Jack
1/4" Phone Jack

ATE-CH

3band EQ with Chorus

ASE-CH

3band EQ with Chorus

ATE-CH gives you the ability to create your own acoustic effects with your ordinary guitar. Once you turn the Chorus switch on, you will experience a totally different acoustic atmosphere from any other equalizer system could provide Rich, Sweet and Melrose sound...
Simply control the 'SPEED' knob to establish an exquisite piece of guitar sounds for your performance.

ATE-CH, ASE-CH, ATE-BL, ASE-BL Common Features

Nominal input level:
Frequency Response:
Input Impedance:
Output Impedance:
Power Supply:
Bass control range:
Middle control range
Treble control range
Low Battery:
Input Jack:
Output Jack

-20 dBV
20 Hz - 20 kHz
1 MOhm
1 kOhm
9 V Alkaline Battery
± 12 dB 80 Hz, 570 mVp-p
± 12 dB 800 Hz, 490 mVp-p
± 12 dB 3 kHz, 500 mVp-p
Low Battery indicator at 5 V
2.5 mm Mono Jack
1/4" Phone Jack

ATE-BL

Soundhole p/u blender preamp

ASE-BL

Soundhole p/u blender preamp

ATE-BL and ASE-BL is the Blender EQ for blending the acoustic sounds of Piezo pickup and Magnetic pickup. It features 3 Band EQ (Bass, Middle, Treble), Phase switch (for the Anti-feedback), Master volume, Low battery LED with Piezo-Magnetic blender.
- The Phase switch has two functions, one is the Anti feedback switch and another is the phase reverse effect on Piezo channel.
- Special character of ATE-BL is not only blending for the piezo and magnetic sound, but also Phase reverse effect on Piezo channel.
- When you push the phase switch to subtract(common mode reduce) the Piezo and Magnetic phase, you will have the light folk and crystal clean sound. In normal mode, Piezo and Magnetic phase will be 'add up' so you can have the rich and warm sound while you are using blender.

ORDERING GUIDE

ORDER CODE

[preamp]-YYY-ZZZ-PPP

     BASIC CONDITION
    - Include STD-jack, wire clip and mount screws.
    - Not include piezo pickup and battery.
    - Piezo pickup should be purchased separately from preamps.

  [preamp] : Preamp model
     ├ ATE-N
     ├ ATE-4
     ├ ATE-CH
     ├ ATE-BL (MSP-50 include)
     ├ ASE-N
     ├ ASE-4
     ├ ASE-CH
     └ ASE-BL (MSP-50 include)

YYY : Endpin jack option - optional
    ├ STD    (default option)
    ├ EPC
    ├ EPG
    ├ EPB
    ├ ENN
    ├ ENG
    └ XLR

                             Go To Endpin jacks

ZZZ : Piezo Pickup - optional
├ PP607
├ PP617

    ├   ...
    ├   ...

                                Go to Piezo page

PPP : Package - optional
    ├ BULK : bulk package
    ├ PCK1 : individual bliste
    └  PCK2 : individual paper box

** PCK1 - Not apply to
               ATE-BL and ASE-BL

                                    Go to Packages

All specifications subject to change without notice.